Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

EDL problem

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

EDL problem

L3 Networker

Hi,

I find this error: EDL(my list) Entry not referenced by a rule.

What does it mean? How can I resolve it?

1 accepted solution

Accepted Solutions

Source or destination address. Think of it as an Address group.

View solution in original post

18 REPLIES 18

L3 Networker

In Objects > External Dynamic Lists you defined an EDL (e.g. you read a list of malicious addresses from some feed), but none of your policies is referencing it. An EDL would probably end up in the Destination Address part of some policy.
Nothing bad, anyway, your firewall is basically just reading an external list of addresses but it's not using that information anywhere.

Hi,

I have a rule with many denies IPs. Is maybe for this reason?

Have I to create a special policy for EDL?

No. A rule with a statically defined list of IPs is not an "external dynamic list". Your configuration is pointing to an external source of addresses, it is reading it, but it's not using it. You can either remove the list from Objects > External Dynamic lists or use it in a policy (if appropriate, of course).

How can I use it in a policy? In which part of configuration have I to enter?

Source or destination address. Think of it as an Address group.

I thought it was enough to insert the EDL instead we also need the security rule. Thaks a lot! Only one last question. Why in the standard Paloalto EDL do you see all the IPs in detail, while in my personalized rules I don't see IPs? In this manner I can't insert any exceptions.

My firewalls exhibit the same behaviour (PanOS 8.1.10), the list is valid, but the GUI shows no addresses in it. Maybe it's a bug?Schermata 2019-10-29 alle 09.40.38.pngSchermata 2019-10-29 alle 09.40.55.pngSchermata 2019-10-29 alle 09.41.15.pngSchermata 2019-10-29 alle 09.41.50.png

Yes that's the problem I meant.

Do you know some good lists to use for blocking malicious IPs?

I found http://plonkatronix.com/plonkatronixBL.txt and this URL https://panwdbl.appspot.com/ (I'm investiganting about this).

 

Not really, I'm sorry. It's something I plan to do, but it's low on my priority list at the moment.

Couple of things to mention.

Is that EDL 'Unassigned IPv4' actually referenced in a policy? If not, it won't show any entries. 

If it is referenced, did you check the CLI? you can view entries with: request system external-list show type ip name "Unassigned IPv4"

 

We do use many of the lists at https://panwdbl.appspot.com/  with no issues. We also keep a custom list that we manage on a local web server.

I have set up the policy but still not presence of IPs in GUI

Did you check the CLI output?

@michelealbrigo  thanks a lot for you help.

If you have a little bit of time can you take a look at these my other problems? (especially about log forwading)
https://live.paloaltonetworks.com/t5/General-Topics/log-to-Kiwi-Syslog/m-p/293687
https://live.paloaltonetworks.com/t5/General-Topics/Decryption-policy-and-SNI/m-p/293676


You help is very appreciated

I've checked now the configuration. Now I can view all the IPs in GUI. Maybe as you say I've checked the list before apply the rule.

Thanks.

  • 1 accepted solution
  • 20804 Views
  • 18 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!