Enable Qos on sub-interface

Reply
Highlighted
L1 Bithead

Enable Qos on sub-interface

Hi all,

 

Can I configure Qos on sub-interface?

Model PA-5260

Software: 8.1.11

 

Thanks

CE

Accepted Solutions
Highlighted
Community Team Member

Hi @EdoardoCerafogli ,

 

You can select sub-interfaces as individual sources in the Clear Text Traffic tab.

 

source_interface.jpg

 

 

Hope this helps,

-Kim.

 

View solution in original post


All Replies
Highlighted
Community Team Member

Hi @EdoardoCerafogli ,

 

You can select sub-interfaces as individual sources in the Clear Text Traffic tab.

 

source_interface.jpg

 

 

Hope this helps,

-Kim.

 

View solution in original post

Highlighted
L4 Transporter

Does this still mean that it's applied to the physical interface overall? - or maybe you don't even have to select the physical interface?

Highlighted
Cyber Elite

@Sec101 

As soon as you choose a specific subinterface as sourceinterface, the configured QoS profile is applied exactly for this traffic and not all traffic going out of the physical interface where you configure QoS. For allo other traffic that does not match the sourceinterface the profile is applied which you configure as default for this physical interface.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!