Firewall idmgr High Availability State Showing difference

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Firewall idmgr High Availability State Showing difference

L3 Networker

I have configure a RMA replacement HA device by following below guide

How to Configure a High Availability Replacement Device - Knowledge Base - Palo Alto Networks

 

I follow until step 10 need to use below command to check the state

debug device-server dump idmgr high-availability state

 Result showing difference.

 

I also tried to reboot and commit force but also the same result how to make it same and what is the impact if this is different?

JiaXiang_0-1659429368761.png

3 REPLIES 3

Cyber Elite
Cyber Elite

@JiaXiang,

Step 11 references why you can have a difference when you restore from the old backup when using Panorama. You may need to manually configure the passive unit to actually get things back inline. 

Thanks for your reply, the firewall is not manage by Panorama and I have use the config audit to check both firewall except some IP of interfaces is different other config is identical and running config also show synced.  I can`t see any configuration I can manually configure anymore. 

L3 Networker

My colleague check on multiples firewall that is deploy for longtime and no issue it also showing result as difference. 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!