06-03-2020 04:48 AM
I am having an issue with both windows and Mac clients.
I have enabled the no direct access to local subnets option but I am still able to browse to my local router and I am getting reports of users being able to access local printers.
currently the access include and exclude networks are blank.
The GP solution is on a VM in AWS on FW version 9.0.7
Windows GP client is 5.0.5 and the Mac client is both 5.0.8-4 and 5.1.3-12
any help would be much appreciated
06-03-2020 07:34 AM
Have same issue with MAC's running 10.15.x. We are using GP v5.1.3.
However, Windows work fine and do not have same issue.
Opened up a case with TAC and hoping for a update/fix soon..
06-03-2020 01:53 PM
Hello,
Check your access routes configuration.
Access routes are the subnets to which GlobalProtect clients are expected to connect. In most cases this is the LAN networks. To force all traffic to go through the firewall, even traffic intended for the Internet, the network that needs to be configured is "0.0.0.0/0," which means all traffic.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFbCAK
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
