11-20-2013 05:59 AM
I have GlobalProtect running for machines when they are off the network. Is there anything that I need to setup that would allow them to be able to print to their local LANs even though the agent is connected back to the FW? I am currently testing this right now, but users most definitely will need to print when not in the office, so I am hoping that someone has some insight on this. Thanks for any assistance you can offer.
Corey
11-20-2013 07:39 AM
Hello ccaruso,
In the GlobalProtect configuration configure the AccessRoute such that all the subnets to connect to corporate are added and not everything ( 0.0.0.0/0). Now anything apart from corporate network would use the local home lan card to access internal resources.
By this way you are achieving split tunneling.
Thanks
11-20-2013 07:39 AM
Hello ccaruso,
In the GlobalProtect configuration configure the AccessRoute such that all the subnets to connect to corporate are added and not everything ( 0.0.0.0/0). Now anything apart from corporate network would use the local home lan card to access internal resources.
By this way you are achieving split tunneling.
Thanks
09-23-2022 02:17 AM
Good day,
How would I go on about creating the below?
We would like to print to x.x.x.x/24 when connected via Global protect (x.x.x.x/24). This site was recently removed from the MPLS and an IPSec tunnel setup between the PAN and the FG. We used to be able to print to x.x.x.x/24 when Site A was on the MPLS.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
