- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
01-18-2013 06:53 AM
Being a newb and never having updated my Active/Passive HA pair, I took the 4.1.10 release notes at face value. There is no mention of special provisions for HA upgrades so I clicked "install" and now have a 4.1.10 Active member and a mismatched 4.1.7 passive member. Having now read the full product documentation I understand the "proper" way to upgrade an HA pair.
What are my best options for proceeding from here?
01-18-2013 07:19 AM
Active is passing traffic so now, only recourse is to proceed with your passive upgrade.
01-18-2013 07:19 AM
Active is passing traffic so now, only recourse is to proceed with your passive upgrade.
01-18-2013 07:56 AM
I did the same thing too the first time.
Basically what you want to do is revert the firewall you upgraded, and then when the HA pair is back how they were running 4.1.7, you can start over and follow the proper method.
If I remember correctly, this should work...
Now you are back to square one, and you can follow this guide for the correct procedure to upgrading a clustered pair:
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!