12-22-2010 01:26 AM
I tested with a known url's IP address and it comes back with the same error, "not-resolved", when using the test url command. I assume there should be a different command for IP's.
The "test url" command followed by an IP address will work. Please make sure you have dynamic URL filtering configured. Alternatively you can go here where there is a test url box on the home page:
12-22-2010 01:33 AM
What PAN-OS are you running?
12-22-2010 01:42 AM
I tested with a known url's IP address and it comes back with the same error, "not-resolved", when using the test url command.
Dynamic URL filtering is enabled.
XXXXXXXXX(active)> test url www.iol.co.za
www.iol.co.za news-and-media (Base db)
XXXXXXXXX(active)> test url 188.8.131.52
184.108.40.206 not-resolved (Cloud db)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!