How to active a License Palo Alto passive Firewall without Internet Access?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to active a License Palo Alto passive Firewall without Internet Access?

L4 Transporter

Hello,

I have a cluster firewalls Model PA-3020, PAN-OS 5.0.1. FW1 active/ FW2 passive.

I have already activated the license in the active FW1 over the Internet without any problems.

How to active License a Palo Alto passive Firewall without Internet?

Thanks


Diego C.

2 REPLIES 2

L6 Presenter

Hi COS,

You can not enable support license without internet connection, which is the first required license to pull rest of the licenses.

Hence you will have to connect device to internet to pull atleast support license. Then you can upload rest of the licenses manually.

Please refer following document for more details.

How to Manually Upload License Keys

Regards,

Hardik Shah

L7 Applicator

Hello Cos,

Since, this is a active passive setup ( you will not be able to connect to internet through data-plane interface, until a fail-over happened ) , you may configure the mgmt interface of the passive firewall to reach internet. And, then retrieve the support license from the license server. Once, support license will be updated, you can upload remaining license manually/retrieve from server.

Hope this helps.

Thanks

  • 4237 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!