04-18-2011 06:39 AM
Is it possible to check power supply status by SNMP?
05-11-2011 07:11 PM
You can do a 'show system state' which will show you a full list, and you can use a | match <value> to view a specific state.
For example
show system state | match chassis.leds:
chassis.leds: { 'alarm': Off, 'fans': Green, 'ha': Off, 'status': Green, 'temp': Green, }
Dominic
PaloAlto Networks
05-02-2011 10:02 AM
Hello,
At present time our MIB does not monitor power supply status. If this is an important feature I would suggest contacting your local SE and have them put in a feature request on your behalf.
~Phil
05-03-2011 12:21 AM
Hello
Thanks for your feedback.
Is there a non SNMP-way to monitor device status? My goal is to create a Nagios script which checks the hardware status (Fan, PowerSuply, Temp, ...).
05-11-2011 07:11 PM
You can do a 'show system state' which will show you a full list, and you can use a | match <value> to view a specific state.
For example
show system state | match chassis.leds:
chassis.leds: { 'alarm': Off, 'fans': Green, 'ha': Off, 'status': Green, 'temp': Green, }
Dominic
PaloAlto Networks
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
