How to check power supply status by SNMP
cancel
Showing results for 
Search instead for 
Did you mean: 

How to check power supply status by SNMP

L2 Linker

Is it possible to check power supply status by SNMP?

1 ACCEPTED SOLUTION

Accepted Solutions

You can do a 'show system state' which will show you a full list, and you can use a | match <value> to view a specific state.

For example

show system state | match chassis.leds:

chassis.leds: { 'alarm': Off, 'fans': Green, 'ha': Off, 'status': Green, 'temp': Green, }

Dominic

PaloAlto Networks

View solution in original post

3 REPLIES 3

L4 Transporter

Hello,

At present time our MIB does not monitor power supply status. If this is an important feature I would suggest contacting your local SE and have them put in a feature request on your behalf.

~Phil

Hello

Thanks for your feedback.

Is there a non SNMP-way to monitor device status? My goal is to create a Nagios script which checks the hardware status (Fan, PowerSuply, Temp, ...).

You can do a 'show system state' which will show you a full list, and you can use a | match <value> to view a specific state.

For example

show system state | match chassis.leds:

chassis.leds: { 'alarm': Off, 'fans': Green, 'ha': Off, 'status': Green, 'temp': Green, }

Dominic

PaloAlto Networks

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!