03-30-2020 09:43 AM
Hi, I am using the 5.x version of paloalto.
HA is Actvie(FW1) - Passive(FW2) configuration and use link group.
For example, failover occurs when the wan link goes down. (FW2 / Actvie)
When the wan link is up rollback.(FW1/ Actvie) At that time, the entire physical link down fw2 was about 1 minute.
I was using it this way.
but I am working on changing paloalto to 8.x version
When rollback, the entire link is not down.
When I roll back, the entire link goes down and hope it gets up again.
Please tell me how to solve
Thank you
03-30-2020 09:59 AM
Hello,
Yeah upgrading from 5 is not going to be fun, just backup your config prior to and at each major setup, just to be safe. What I think you are referring to are the HA timers. But I recommend you upgrade first then worry about the timers.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClGNCA0
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
