How to physical link down when rollback

cancel
Showing results for 
Search instead for 
Did you mean: 

How to physical link down when rollback

L0 Member

Hi, I am using the 5.x version of paloalto.

HA is Actvie(FW1) - Passive(FW2) configuration and use link group.

For example, failover occurs when the wan link goes down. (FW2 / Actvie)

When the wan link is up rollback.(FW1/ Actvie)  At that time, the entire physical link down fw2 was about 1 minute.

I was using it this way.

but I am working on changing paloalto to 8.x version

When rollback, the entire link is not down.

When I roll back, the entire link goes down and hope it gets up again.

Please tell me how to solve

 

Thank you

1 REPLY 1

Cyber Elite
Cyber Elite

Hello,

Yeah upgrading from 5 is not going to be fun, just backup your config prior to and at each major setup, just to be safe. What I think you are referring to are the HA timers. But I recommend you upgrade first then worry about the timers.

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClGNCA0

 

Regards,

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!