I am trying to find out information about user data use while they are on the VPN.

Showing results for 
Show  only  | Search instead for 
Did you mean: 

I am trying to find out information about user data use while they are on the VPN.

L0 Member

We had a user that had a mifi data usage bill that was very high. They claim that all they used it for was to VPN into the PA, and then RDP to a local pc. The PA said their internal data usage was low. The user said once they had VPN'ed into the network, they would leave the VPN open for hours. 

So would the data usage of this user's VPN connection show up as the data usage displayed in a user report? To put it another way, if user A, used a MIFI to VPN into the PA and did nothing else, and his data usage on the MIF said 1gig, would the PA show approximately 1 gig worth of data usage, because it includes the data from the VPN tunnel


L7 Applicator

any extra traffic (vpn tunnel negotiation,etc.) should be negligible.  

Traffic in the logs should show the traffic from the client , If the rule if configured correctly.  


So, Either:

1. There could be a rule allowing and not logging the traffic.. 

2. Traffic from the client is going somewhere else (not across the VPN tunnel)


LIVEcommunity team member
Stay Secure,
Don't forget to Like items if a post is helpful to you!
  • 1 replies
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!