Import named configuration snapshot failure

L3 Networker

Import named configuration snapshot failure

I'm trying to import my production Panorama VM configuration into my lab Panorama VM and I am getting the following message, and I'm not entirely sure what it means:


upload -> config -> content Node can be at most 41943060 characters - current length after decoded 42002198upload -> config -> content is invalid


Does this mean the Panorama configuration file must be under 42 MB to be imported?  If it's running in production and I have to recover, does this mean I'm screwed?  Any help would be appreciated.



L4 Transporter

Hi Dan,


You're near the limit so you can probably cleanup some things in your configuration. Also you can always manually extract the configurations from the snapshot and configured them through the cli.

Or the easy way upgrade panorama to 7.0 (you can test it in your lab)



Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!