- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
11-18-2023 01:20 AM
Goal: To keep my IKE/IPSec profiles used for site-to-site VPNs consistent across all of my firewalls.
Example: I have a "Crypto Profile" template that defines some IKE and IPSec crypto profiles. This template is added to the template stacks for each of my individual firewalls. I want to use these crypto profiles for all of the site-to-site VPN tunnels I have configured in my organization. I configure these tunnels in the device-specific template stacks.
How can I then reference the IKE/IPSec profiles defined by those templates, in the site-specific templates that configure the individual tunnels between sites?
For example, if I have the following templates defined in Panorama:
My Template Stacks look something like this:
How can I reference the crypto profiles defined in the "Crypto Profiles" template in the "Site Network Settings" template that will configure the individual IPSec tunnels?
11-18-2023 01:57 AM
Nevermind I figured it out.
02-22-2024 09:56 AM
What was the solution?
02-28-2024 07:08 AM
Hi @salmani ,
I found a related article: https://live.paloaltonetworks.com/t5/panorama-discussions/referencing-items-in-a-template-that-are-d....
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!