IPSEC Tunnel Bandwidth Monitoring

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

IPSEC Tunnel Bandwidth Monitoring

Is there a built in function in PANOS to monitor bandwidth across IPSEC tunnels?

I can pull snapshots between IP's using ACC, but does not provide flow history similar to what Network Monitor does. Even setting up QOS only gives me the current snapshot.

Would NetFlow be able to monitor tunnel traffic?

Thanks,

Jim

4 REPLIES 4

L5 Sessionator

Hi,

If you IPSec tunnel belongs to specific zones then you can get various information

vpn_bw.JPG

Hope this helps. Thank you.

L6 Presenter

Hello PMD,

Netflow works only with physical interfaces. It doesnt work with sub-interface or tunnel.

Kindly refer following document.

Can Netflow Data be Exported with Sub-Interface Names?

At best you can put tunnel interfaces in different zone named VPN and generate custom report as mentioned above.

Regards,

Hardik Shah

Thanks for the assist. Totally slipped my mind about generating a custom report.

Thanks again.

Hi Jim,

Glad we could help. Thank you.

  • 6524 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!