is it support ECMP protocol ??

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

is it support ECMP protocol ??

L3 Networker

Hi all.

Is it support ECMP protocol from PAN??

I can’t find whether ecmp protocol support from datasheet and knowledge base.

does PA has any other similar protocol if not support ecmp??

Please refer to below URL for ECMP.

http://en.wikipedia.org/wiki/Equal-cost_multi-path_routing

Regards,

Eugene

1 accepted solution

Accepted Solutions

L4 Transporter

Hi Eugene,

ECMP is not a protocol, per se, but a way to allow multiple links chosen from the routing table to be installed in the forwarding table.  Then some sort of algorithm is used to load share traffic between both links.

The Palo Alto Networks firewall does not support ECMP at this time.  Only a single best path is installed in the forwarding table from the routing table.

Cheers

Kelly

View solution in original post

4 REPLIES 4

L4 Transporter

Hi Eugene,

ECMP is not a protocol, per se, but a way to allow multiple links chosen from the routing table to be installed in the forwarding table.  Then some sort of algorithm is used to load share traffic between both links.

The Palo Alto Networks firewall does not support ECMP at this time.  Only a single best path is installed in the forwarding table from the routing table.

Cheers

Kelly

Hi Kelly.

Thanks for your answer.

Actually, one of my prospective customer wants to configure with ECMP, if it possible.

Thanks again.

Regards,

Eugene.

You can't even do an ECMP equivalent, just policy based forwarding.  Can you monitor for track-ip like scenarios to fail default routes, tunnel routes etc so you can dual-home it though?

Happy news, ECMP is added now in PanOS 7


ECMP

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 1 accepted solution
  • 2818 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!