Logcard Interface shows unk/unk/down(disabled)

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Logcard Interface shows unk/unk/down(disabled)

L2 Linker

Has anyone out there experienced this?

 

                  name             id speed/duplex/state                             mac address
                  --------------------------------------------------------------------------------
                  ethernet1/1 64 10000/full/up                                     58:49:3b:fb:72:40
                  ethernet1/2 65 10000/full/up                                     58:49:3b:fb:72:41
                  ethernet1/3 66 ukn/ukn/down(disabled)                    b4:0c:25:e0:40:42

 

We have installed a new Finistar SFP+ (FTLX8574D3BCL), which according to the documentation is compatible with PA-7050.

 

The IP assigned to the interface cannot be pinged.

 

What can I do to troubleshoot this phenomene?

 

Regards,

 

Jasper Freeman

1 accepted solution

Accepted Solutions

The solution to the problem was:

 

     Check the switch interface on which the logcard is connected.

     The on the switch interface was set to 1000 und should be 10000.

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Hi Jasper

 

it looks like the interface has been set as 'down' manually

make sure the link state is set to auto or up:

link state.png

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

The solution to the problem was:

 

     Check the switch interface on which the logcard is connected.

     The on the switch interface was set to 1000 und should be 10000.

  • 1 accepted solution
  • 3382 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!