09-05-2017 04:31 AM
Has anyone out there experienced this?
name id speed/duplex/state mac address
--------------------------------------------------------------------------------
ethernet1/1 64 10000/full/up 58:49:3b:fb:72:40
ethernet1/2 65 10000/full/up 58:49:3b:fb:72:41
ethernet1/3 66 ukn/ukn/down(disabled) b4:0c:25:e0:40:42
We have installed a new Finistar SFP+ (FTLX8574D3BCL), which according to the documentation is compatible with PA-7050.
The IP assigned to the interface cannot be pinged.
What can I do to troubleshoot this phenomene?
Regards,
Jasper Freeman
09-13-2017 01:02 AM
The solution to the problem was:
Check the switch interface on which the logcard is connected.
The on the switch interface was set to 1000 und should be 10000.
09-05-2017 05:57 AM - edited 09-05-2017 05:57 AM
Hi Jasper
it looks like the interface has been set as 'down' manually
make sure the link state is set to auto or up:
09-13-2017 01:02 AM
The solution to the problem was:
Check the switch interface on which the logcard is connected.
The on the switch interface was set to 1000 und should be 10000.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
