Management profile issue

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Management profile issue

L4 Transporter

Hi Friends,

please suggest, i have create a management profile (ping,ssh,https ) and apply e1/1 (static ip) but i am not able to ping and web access.

Regards Satish

1 accepted solution

Accepted Solutions

if you have a NAT rule with source zone any this can be the issue

View solution in original post

12 REPLIES 12

L7 Applicator

Hello Satish,

Do you have a "default deny" policy on this firewall, it may block interface management traffic ( intra zone traffic).

For an example: If you have enabled management profile (ping,ssh,https ) on ethernet-1/1 interface ( Trust zone) and you are trying to access the firewall from your Trust network, then you have to configure a "Trust to Trust" security policy on this firewall ( if you have a any-any-deny rule at the bottom).

Hope this helps.

Thanks

Hi Hulk,

I have already  create a policy for the same like (trust to trust and wan to wan ) but facing same issue and also i am not getting any logs. please suggest.


Regards

Satish



Hello Satish,

Do you have multiple VR or VSYS on your setup...?

Thanks

L6 Presenter

hi,

best way look if paloalto drops that or not (ping with -t and start doing)

go to cli

debug dataplane packet-diag set filter match source SOURCEIP destination INTERFACEIP

debug dataplane packet-diag set filter match source INTERFACEIP destination SOURCEIP

debug dataplane packet-diag set filter on

show counter global filter packet-filter yes delta yes severity drop

output will show information

Hello Satish,

Do you have any NAT policy configured for the same interface IP address..?

Thanks

Hi Hulk, No, i dont have multiple VR. Regards Satish

Hi Hulk,

yes i have NET policy for the same interface.

Regards

Satish

if you have a NAT rule with source zone any this can be the issue

Hi PANOS,

You are right after disable NAT rule. i am able to ping and SSH, HTTPS.

Regards

Satish

please suggest to me best practice for the same.

When using NAT rules do not use any,

instead use the real zone names related.

What is the rule disabled ? can you share

  • 1 accepted solution
  • 5824 Views
  • 12 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!