maximum number of GlobalProtect VPN tunnels for PA-5450

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

maximum number of GlobalProtect VPN tunnels for PA-5450

L2 Linker

Hello PA community ,

 

Our customer is looking for the maximum limit for GlobalProtect Gateways on PA-5450.

 

The most recent KB we found was this which covers 5250, but we would very much like to verify if it is still the same or more for 5450:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClidCAC

 

we checked also compare link and PA-5400 Series Firewall Overview but no clue.

https://www.paloaltonetworks.com/products/product-selection#

 

Thanks in advance for your help on this.

 

Best regards.

1 accepted solution

Accepted Solutions

Community Team Member

Hi @RomainCouvreur ,

 

You can check the device limits via cli using the command :

> show system state filter cfg.general.max*

 

Check out this KB: What is the Command to Display System Limits? 

 

Check for the value next to 'cfg.general.max-ssl-portal'

 

Kind regards,

-Kiwi.

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

View solution in original post

5 REPLIES 5

Community Team Member

Hi @RomainCouvreur ,

 

You can check the device limits via cli using the command :

> show system state filter cfg.general.max*

 

Check out this KB: What is the Command to Display System Limits? 

 

Check for the value next to 'cfg.general.max-ssl-portal'

 

Kind regards,

-Kiwi.

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Cyber Elite
Cyber Elite

Hi @RomainCouvreur ,

 

The PA-5450 can have 60K GlobalProtect clients.  Many of the max #s can be found on the Product Selection page -> https://www.paloaltonetworks.com/products/product-comparison?chosen=pa-5450,pa-5410.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

L2 Linker

Hello Team ,

 

Thank you for your feedback.

 

However , I m not asking about how many GlobalProtect clients can be connected at one time.

What I need to know is how many GlobalProtect portals and/or Gateways can be configured on the device before we will reach a limit?

The reason being is customer is a MSP and might be deploying one portal and gateway per customer.

 

Thanks in advance for your assistance.

 

Best regards.

 

 

Cyber Elite
Cyber Elite

Hi @RomainCouvreur ,

 

Yeah, I was curious if you were asking about tunnels (mentioned in topic) or gateways (mentioned in post).  Looking at the URL you posted, I should have known you were talking about gateways.  My bad!

 

What you're really saying is that PANW needs to update the KB!

 

I did use @kiwi 's command on a PA-220 we have.

 

> show system state filter cfg.general.max* | match portal
cfg.general.max-ssl-portal: 6

 

The number of portals matches the number of gateways listed in the KB URL.  I wonder if the max GP portals and gateways is the same?  You could check the results on other NGFWs if you have it.  If they match, go with @kiwi 's answer and mark it as the solution.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

Hello Tom ,

 

We checked the output on others NGFWs and it matches the number of gateways listed in the KB URL.

 

Thanks again for your help and for sure I will mark kiwi 's answer as the solution.

 

Have a nice day ahead.

 

Best regards.

 

  • 1 accepted solution
  • 4006 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!