MGMT Interface fluctuating

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

MGMT Interface fluctuating

L4 Transporter

Hello,

 

Our MGMT Interface is fluctuating result in inaccessibility of the firewall and after some time it comes back online.

Using PAN-PA-VM-300 with ver 8.0.4. Restarted the management plane. 

 

> show interface management


-------------------------------------------------------------------------------
Name: Management Interface
Link status:
Runtime link speed/duplex/state: unknown/unknown/up
Configured link speed/duplex/state: auto/auto/auto
MAC address:
Port MAC address 00:00:06:a5:0d:11

Ip address: 192.x,x.x
Netmask: 255.x.x.x
Default gateway: 192.x.x.x
Ipv6 address: unknown
Ipv6 link local address: fe80::a:b:f:d
Ipv6 default gateway:
-------------------------------------------------------------------------------


-------------------------------------------------------------------------------
Logical interface counters:
-------------------------------------------------------------------------------
bytes received 134411960938
bytes transmitted 91332553901
packets received 67480028
packets transmitted 72436478
receive errors 0
transmit errors 0
receive packets dropped 2209
transmit packets dropped 0
multicast packets received 2
-------------------------------------------------------------------------------

 

What could be wrong with it?

2 REPLIES 2

Cyber Elite
Cyber Elite

@Farzana,

Your Runtime link should actually have values displayed, not unknown. Have you looked at the switch that feeds the managment port and verified that nothing is wrong on that end, it may not be an actual firewall issue. 

@BPry,

 

It is a virtual device where all the VM’s reside, if this would have been a vmware issue all servers should timeout as well.

  • 1692 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!