Missing add button config tab

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Missing add button config tab

L3 Networker



I don't see any add button anymore on the config tab. 


L7 Applicator

Hi @kevin_thys,

you can enable the Add button again by clicking on the "eye" icon in the bottom left of the table (this enables "expert mode").

Or you can add nodes by clicking on the hamburger icon, selecting a prototype and then click on "CLONE".





Having the add sign by default would be usefull when setting up the configuration. 

Hi @kevin_thys,

you can add nodes by clicking on the hamburger icon, selecting the prototype and then clicking on CLONE.

While the add button is more straightforward when you already know the proto you'd like to use, going thru the prototype library gives more insights about each prototype.


In the next release (0.9.30) the prototype library will also show information about indicators, share level and confidence level of each prototype. Thanks for the suggestion !

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!