09-25-2023 07:30 AM
Hi All,
We are managing the HA firewall over public facing interface. Now trying to Monitor the same interface by creating the Interface Mgmt Profile and allowing SNMP. But i can ping the interface SNMP polling is not working.
Is there anything else i need to configure? I can see 161 UDP is allowed on firewall.
Regards,
Sanjay S
09-26-2023 03:12 PM
Hi @Sanjay_Ramaiah ,
Have you enabled SNMP and defined your version, manager, and authentication? SNMP setup (Device -> Setup -> SNMP Setup) or creating a security policy?
10-04-2023 11:48 PM
Thanks for the reply Jay.
I can see SNMP is enabled on the interface. Created the interface management profile and allowed on it.
Regards,
Sanjay S
10-05-2023 08:16 AM
Hello,
Check the logs to see if/why its getting blocked. If its allowed, the it could be the SNMP config on your PAN or monitoring device. Also please make sure that the snmp traffic is only allowed from a whitelisted IP address. Also remember that only SNMv3 is encrypted.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
