Multiple VLANs through Network Interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Multiple VLANs through Network Interface

L0 Member

Hopefully this is a very simple question, but I wanted to make sure I was actually researching the correct thing.

 

I am planning on connecting a hypervisor (Hyper-V 2012), directly to one of my Network Interfaces on my PA.  The hypervisor has multiple VLANs, and I need them all to go through the PA.   I incorrectly thought if I just set the VLAN/Virtual Wire to "none" that it would just allow through whichever VLAN that the hypervisor tagged the traffic as.  Am I now correct in thinking that I need to create a Virtual Router that takes in both VLANs?  Can anyone point me to some instructions on how to set this up correctly?  

1 accepted solution

Accepted Solutions

L6 Presenter

Hi,

 

So my understanding is that you will have a multiple VMs running on the Hyper-V server on the different VLANs. What you could do is to have a subinterfaces configured on the PA physical interface. VR it is just a routing table attached to the interface.

Check this out:

 

https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Layer-3-Subinterfaces/ta-p/67...

 

https://live.paloaltonetworks.com/twzvq79624/attachments/twzvq79624/documentation_tkb/188/1/Layer2_N...

 

Thx,

Myky

View solution in original post

1 REPLY 1

L6 Presenter

Hi,

 

So my understanding is that you will have a multiple VMs running on the Hyper-V server on the different VLANs. What you could do is to have a subinterfaces configured on the PA physical interface. VR it is just a routing table attached to the interface.

Check this out:

 

https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Layer-3-Subinterfaces/ta-p/67...

 

https://live.paloaltonetworks.com/twzvq79624/attachments/twzvq79624/documentation_tkb/188/1/Layer2_N...

 

Thx,

Myky

  • 1 accepted solution
  • 2038 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!