07-13-2021 09:31 AM
Dear Team,
Netflow hasn't been working. When we enable and disable Netflow on an interface our SolarWinds server receives a tiny bit of Netflow traffic but then stops again. Netflow traffic is however leaving the firewall and destines for the SolarWinds server.
We have not found any drops in the PCAP.
We found some error in the global counters, But we not sure it's related to Netflow.
flow_fwd_l3_mcast_drop 170 2 drop flow forwar
d Packets dropped: no route for IP multicast
flow_fwd_l3_noarp 190 3 drop flow forwar
d Packets dropped: no ARP
Regards,
Vishnu PS
07-13-2021 10:17 AM
Hello,
What do your unified logs show for the traffic? What about the Service Route Configuration? Some models of PAN you cannot use the management interface as the source of the Netflow traffic.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u0000008UuYCAU
Regards,
07-13-2021 08:58 PM
Hi, This is a PA 850, We have configured the service route management interface all.
Regards,
Vishnu PS.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
