No entries in Wildfire logs - PanOS 5.0

[torm]

I'm not getting any log entries under the WildFire log page i 5.0. In the data filtering logs I have entries with both "wildfire-upload-success" and "wildfire-upload-skip". I was expecting to see these entries in the Wildfire log page as well. What is supposted to be logged in the Wildfire logs, and how do I get it working?

[mikand · Accepted solution]

Do you have an active wildfire subscription?

According to the PANOS 5.0 admin manual:

"

Log:

WildFire

Description:

The WildFire logs will show the result of files analyzed by WildFire. Some of the fields that will be displayed include: Filename, Source Zone, Destination Zone, Attacker, Victim, and Application.

Note:  A WildFire subscription is required for integrated logging. If you do not have a subscription, you can view log information by using the WildFire portal at https://wildfire.paloaltonetworks.com. (refer to “About WildFire” on page 413 and “Using the WildFire Portal” on page 417)

"

[torm]

That's probably it. I do not have a wildfire subscription. I was under the impression that you would get the logs in the wildfire tab anyway.

Thanks for clearing that up.

[Gururaj]

Hi Torm,

Even we have the valid wildfire subscription, not able to see any logs in wildfire logs in device but in the data-filtering logs for some exe files it is showing wildfire-upload-success ( means file has uploaded to wildfire cloud for analysis).

I executed the command  >test wildfire registration   -  showing registered

                                      >show wildfire status       - showing 4 files forwarded

But still after 3 hours also i am not able to see the logs in wildfire logs section on device.

Regards,

Gururaj