- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
We want to configure ipsec site to site tunnel between two locations as per below details
1) Location A having single ISP address i.e Wan address (184.108.40.206/30) will connect to location B having 2 ISP address (220.127.116.11/30 & 18.104.22.168/30) and form a IPsec site to site tunnel.
Is it possible for doing the Same ?. If yes how my traffic at location B will differentiate to which tunnel traffic comes and reverse path should be the same
The way I do it is to build the tunnels and then setup OSPF between the two sites and make the metric for one of the tunnels higher than the other. This way OSPF determines which tunnel to use and when. If one is down the other takes over, etc.
There are other ways as well such as Policy based forwarding and symmetric return.
Hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!