- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
06-07-2016 12:57 PM
Hello,
Is there a way to modify Loopback Interfaces in firewalls previously pushed from Panorama ?
We cannot override it in the GUI with the override Button ? Tryed in 7.0.7 amd 7.1
Is this a supported Feature ?
06-08-2016 05:06 AM - edited 06-08-2016 05:09 AM
Hi @rekuhn
Currently, the Palo Alto Networks firewall does not support the override of Loopback interfaces that have been pushed from Panorama. When trying to override, the firewall displays the following message:
Such a change requires a design change and it's currently not on the roadmap.
I recommend that you reach out to your local SE and have him file a feature request for this.
Cheers !
-Kim.
06-08-2016 05:06 AM - edited 06-08-2016 05:09 AM
Hi @rekuhn
Currently, the Palo Alto Networks firewall does not support the override of Loopback interfaces that have been pushed from Panorama. When trying to override, the firewall displays the following message:
Such a change requires a design change and it's currently not on the roadmap.
I recommend that you reach out to your local SE and have him file a feature request for this.
Cheers !
-Kim.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!