PA-3410 : STP Block cannot be created

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA-3410 : STP Block cannot be created

L3 Networker

Hello all, 

We have a PA-3050 configured with V-wire and are operating as STP Block on the uplink of Backbone_B.
 
We are going to replace PA-3050 with a new construction firewall, PA-3410.
 
STP block is not generated in the in-house LAB before deployment, and disconnect occurs during communication.

Has anyone experienced this before?

스크린샷 2022-09-26 오전 10.20.49.png


Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions

Community Team Member

Duplicate post: https://live.paloaltonetworks.com/t5/general-topics/pa-3410-spanning-tree-cannot-be-generated/td-p/5...

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

View solution in original post

1 REPLY 1

Community Team Member

Duplicate post: https://live.paloaltonetworks.com/t5/general-topics/pa-3410-spanning-tree-cannot-be-generated/td-p/5...

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!