08-09-2024 01:56 AM
PA-440 gpvpn client only getting 10M
we converted tunnel to ipsec.
we use ipsec parameters AES-GCM
we adjusted mtu to 1362
but still not getting speed above 10M
08-09-2024 10:57 AM
Do you see this behavior with all GlobalProtect clients, or are you seeing it with a single client? How are you testing things (iPerf, Speedtest, SMB transfer, etc.)? Are you testing things via a controlled connection loop or across an ISP connection?
08-12-2024 05:30 AM
sorry for late reply ,
yes I see it with all client . 6.2.x and 6.1.x versions.
we are using SMB transfer and also tech support file download from firewall management interface .
none of showing speed above 10M.
With non palo vpn when check its more than 30M .
Using ISP connection home network
their is no QOS applied .
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
