PA-440 gpvpn client only getting 10Mbps

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA-440 gpvpn client only getting 10Mbps

L0 Member

PA-440 gpvpn client only getting 10M

 

we converted tunnel to ipsec.

we use ipsec parameters AES-GCM

we adjusted mtu to 1362 

 

but still not getting speed above 10M 

2 REPLIES 2

Cyber Elite
Cyber Elite

@vishwanathwagh,

Do you see this behavior with all GlobalProtect clients, or are you seeing it with a single client? How are you testing things (iPerf, Speedtest, SMB transfer, etc.)? Are you testing things via a controlled connection loop or across an ISP connection?

sorry for late reply ,

yes I see it with all client . 6.2.x and 6.1.x versions. 

we are using SMB transfer and also tech support file download from firewall management interface . 

none of showing speed above 10M. 

With  non palo vpn when check its more than 30M .

Using ISP connection home network

their is no QOS applied .

 

 

  • 366 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!