05-12-2026 03:08 PM
Hey All,
Completely new to firewall configurations, so i'm hoping to get some clarity.
I was tasked to configure a PA-445, i'm trying to do a basic setup and can log into the GUI but the option to setup through the Standard method doesn't do anything after clicking the button.
The ZTP setup works when i click on that button and can see the interface but i get the notification : Zero Touch Provisioning (ZTP) is in progress. Configuration operations are disabled until the ZTP process completes. To switch to standard mode, please use the operational command “set system ztp disable”.
I cant find anything in the interface to run this command and trying via terminal says i am connected to the device but no login option to proceed.
Happy to share more detail and hoping for some guidance.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
