PA--820 Power Supply Voltage In (Vin) Voltage and Frequency Range

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

PA--820 Power Supply Voltage In (Vin) Voltage and Frequency Range

L0 Member

Hello,

 

I am looking for the exact specification of the PA-820 PSU Voltage and Frequency range, as I need to install the device in mobile asset where the ranges may fluctuate within certain parameters.

 

Due the environment that the units will be deployed in we need to better understand the tolerances of  this PSU and I am hoping that there is a test report or formal information similar to the following Bold text.

 

  • Voltage : 230VAC -10% / +7% = Range 207 - 246.1VAC
  • Frequency : 50Hz +/- 5% to 60Hz +/- 3% = Range = 47.5Hz to 61.8Hz

Many thanks in advance

3 REPLIES 3

Cyber Elite
Cyber Elite

Hi @Steve-P ,

 

Check out these specs.  https://docs.paloaltonetworks.com/hardware/pa-800-hardware-reference/pa-800-series-firewall-specific...

 

Your parameters exceed those by a little.  I don't know if there is a report of anything.  You may need to open a case.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

Thanks for the response, I had seen this and this just provides the base values and not the supported Vin or Frequency ranges, I will look into opening a test.

 

Thanks 

Steve

Cyber Elite
Cyber Elite

Hello,

I would recommend putting in a small UPS to clean/filter the power output. I used to work for a construction company and we had many sites running on generators. UPS's were a must otherwise it would destroy the equipment we put onsite.

Regards,

  • 1066 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!