PA-VM-KVM-10.2.5.vm_eval not accepting username/password

[sanjay.kol]

KVM series (PA-VM-KVM-10.2.5.vm_eval) PANGFW evaluation copy on my laptop running GNS3 on top of VMware workstation.

2024-09-24 09:09:11.345 -0700 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code
2024-09-24 09:09:12.347 -0700 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code
2024-09-24 09:09:13.349 -0700 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code
2024-09-24 09:09:14.353 -0700 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code
2024-09-24 09:09:15.361 -0700 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code
Error: unable to connect to Sysd
Password:
vm login:

I need help.

Thanks

[JayGolf]

Hi @sanjay.kol ,

Id recommend re-importing the image into vmware and making sure you configure with the minimum system requirements.

[sanjay.kol]

As advised by you I did whatever you referred to in the document, but unfortunately the problem still remains unresolved. Below is the configuration and error.

RAM: 8 GB

CPU : 2 CORE

HDD: 100GB

Pls. Help.

[sanjay.kol]

I re imported it about 5 to 6 times. I did it in VMWare, EVE-NG ,GNS3 but I received the same error in every application. System also accepts IP by DHCP with which I can ping the system but unable to login.

Thanks for your early response.

[JayGolf]

Hi @sanjay.kol ,

Did you get the eval from https://www.paloaltonetworks.com/vm-series-trial ? 

[sanjay.kol]

Hi Jay,

Yes I received the Eval from

Thanks.

[JayGolf]

Email Sanjay back with the issue you are experiencing and request a new image to be sent over for you to re-download. 

[anonymous.anonymous.1551]

were you able to get it to work? im stuck here for days trying to get my 10.2.5 up and running on eve!!

[Adam_D]

Hello All,

did anybody managed to find a solution for 10.2.5 version? I'm experiencing similar issue under this thread "https://live.paloaltonetworks.com/t5/general-topics/the-pa-vm-eval-is-crashing-after-minutes-since-r....

I'm tried on VMware workstation - I explained everything under the above link. Checked it also in gns3 by uploading new appliance and creating new version because gns3 marketplace created designated import file for 10.2.3 and 11.0.0 versions, however after creating new one, validation installing etc. happening normalny but in this case despite more hardware requirements stucking on PA-HDF for hours. 

I red that some users was able to deploy 11.0.0 version BUT that does not matte if there is no license and official website of PALO ALTO is sharing 10.2.5 version with issue... maybe worth to highlight that to someone who is responsible for this version because we're not able to work with this version.

I'm ready to help you with testing purpose newly generated version. Just reach me out.

BR Adam