PA3250 - L2 - L3 interface communication

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

PA3250 - L2 - L3 interface communication

L0 Member

Hi Team!

 

I have simple topology ( pls see at the picture). 

I configured eth 1/1 ( for PC2) as L2 interface, but without Security Zone. 

I want to ping from PC2  - default Gateway (AE1.121) and PC1. 

 

Is it possible to set up Palo Alto like this?

 

Pls, give me details, I can't find any  use cases with the similar configuration.

 

Thank you in advance.

 

PA_NX.JPG

2 REPLIES 2

L4 Transporter

I don't think the L2 port will be able to communicate with an L3 interface. 

When you have an L2 subnet and you want communication in/out, you'll need a vlan interface, not an L3 interface.

Why are you connecting a PC directly to the firewall? 

Cyber Elite
Cyber Elite

Hello,

You will need a zone and policies that allow that traffic. Check the logs to see why the traffic is not making it.

 

Regards,

  • 2116 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!