- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-18-2020 11:30 AM
Hello,
I'm needing some clarification on one aspect of deploying a 2nd redundant PA820 in high availability mode. I currently have my 2nd 820 deployed with the management interface configured.
My first question is. When setting up my 2nd PA i discovered that I only have 10gb sfp's for interfaces that I'm matching on my current PA. The question is will this cause a conflict of some kind between the two devices.
I know in the past when deploying a pair of cisco asa 5515's that i needed to match the sfp's on both ends. Anyone able to confirm that?
02-18-2020 11:42 AM
Hello,
Yes the port speed and duplex must match on both devices.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClIbCAK
Regards,
02-18-2020 11:42 AM
Hello,
Yes the port speed and duplex must match on both devices.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClIbCAK
Regards,
02-18-2020 12:17 PM
Thanks for the quick reply. That make sense.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!