Panorama Device Removal
cancel
Showing results for 
Search instead for 
Did you mean: 

Panorama Device Removal

L7 Applicator

I had to rebuild Panorama 7 on ESX as for some reason after a power outage the image could not be restored...

 

New installation completed and licensed but I cannot get the firewall 3020 to connect.

 

I have removed the Panorama settings from firewall and re-applied.

 

I have added the serial number to Panorama but the firewall is complaining.....

 

Error:  pan_cmsa_tcp_channel_setup(src_panos/cms_agent.c:623): cms sent untrusted cert!!

 

I can see the certificate via cli "show panorama-certificate", this shows the certificate from the original Panorama connection but cannot remove it.

 

So, what do i need to do to rejoin to a new Panorama installation. 

4 REPLIES 4

L7 Applicator

give this a try:

> delete authentication user-file ssh-known-hosts user ip <panoramaIP> username panorama 
Tom Piens
Like my answer? check out my book! https://bit.ly/MasteringPAN

@reaper 

Thanks for your reply...

 

ssh-known-hosts does not exist yet for panorama

you do that on the firewalls, not on the new panorama

 

it erases the ssh-known-hosts entry they have for the previous panorama so they can create a new one for the same IP

Tom Piens
Like my answer? check out my book! https://bit.ly/MasteringPAN

s I did try this on the firewall,  I also chnaged Panorama IP but to no avail.

 

Pan-7.png

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!