02-15-2011 01:06 AM
Hi Guys,
We have installed Wind 2008 server, with 20 GB Ram with 800 Gb HDD for Panorama.
But when we configure panorama, it does not show that it can use anything more than 3.6 Gb of Ram.
We have installed VM ware Server, which on Vmware site says would support up to 8 GB ram.
But in our case, the Panorama cannot be modified to anything more than 3.6 Gb post installation(Find attached)
Please advise if there is a way to increase the RAM used by Panorama through your tech team.
02-15-2011 05:33 AM
Per the Panorama Deployment Guide v1.0: Panorama memory requires 2GB of RAM and has a maximum of 4GB RAM
-Benjamin
02-15-2011 05:33 AM
Per the Panorama Deployment Guide v1.0: Panorama memory requires 2GB of RAM and has a maximum of 4GB RAM
-Benjamin
02-15-2011 06:24 AM
Hi,
the RAM limit is inside the PANOS 32bit. A 32 bit architecture cannott address more than 4 GB of memory.
You see 3.6 GB only because the other RAM is used for peripheral device's memory mapping (video, audio, I/O, etc).
Regards
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
