04-24-2015 05:29 AM
I've a cluster of PA500 running 6.1.3.
When I try to login to the system (with the GUI), the login always fails and I'm redirected back to the login page.
After login again, it works fine...
Any idea ?
04-28-2015 06:11 AM
Did you check authd logs to see if the authentication is successful during the first attempt?
If you seeing nothing unusual, you might want to check if disk-space is almost full.
>show system disk-space
04-29-2015 02:08 AM
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 3.8G 1.6G 2.1G 43% /
/dev/sda5 7.6G 3.5G 3.8G 49% /opt/pancfg
/dev/sda6 3.8G 1.6G 2.0G 45% /opt/panrepo
tmpfs 459M 69M 390M 16% /dev/shm
/dev/sda8 125G 8.5G 110G 8% /opt/panlogs
So, the issue is not coming from the disk space...
04-29-2015 03:30 AM
What does the system log show for the first failed login attempt?
04-29-2015 06:07 AM
Is the administrator account utilizing local authentication or an external source (LDAP, RADIUS, Kerberos)?
Do you experience the same issue when connecting via SSH or just the WEBUI?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!