PBF config works wonderful, except

Showing results for 
Show  only  | Search instead for 
Did you mean: 

PBF config works wonderful, except

L3 Networker

We have two ISP links and have PBF configured. Our main Internet connection went down on the DS3 side of the next hop router at 3AM. The ethernet interface that we connect to never went down. I had to manually disconnect the ethernet interface on the PAN for PBF to work. I imagine this is a common scenario. Any ideas? TIA.


L4 Transporter


For 4.0, you can configure an IP address for PA to ping, as part of the monitoring critiera. Go to forwarding -> monitor and input the IP address. You can refer to p.138 of 4.0 admin guide for more details.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!