The recommended PDF Footer dimensions are 182 x 154 per the GUI but when I put a logo in matching those exact dimensions, it compresses it vertically. Are these recommendations wrong? If so, what are the actual dimensions for the PDF Footer?
Please follow bellow instructions to find recommended dimension. Basically you need to click on preview button. Preview buttons are in RED Square. Let me know if that helps.
Yes the image would show up fine in the preview but then when the PDF report was created, it took the image and squeezed it vertically. I created the image to match the recommended settings exactly. Only when I narrow the height of the image to 50 pixels does it seem to look right.
I just tried in LAB, it works just fine, I think original image might have error in pixel. I used ms-paint to adjust pixels.
Let me know if that helps. Else provide me image what you are using, I will try out in LAB.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!