Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
05-25-2016 05:32 AM
Hi,
Am I correct when I state that a PAN firewall cannot set different timeouts per used port?
Fortigates and Junipers seem to have this option, where they can set their defaults and specify -if required, for certain ports.
On a PAN device, I don't think I'll have this option to do so, without prolonging them for all services and impacting more than I would like to see..
Kr,
Arne
05-25-2016 06:27 AM
Hi Hi,
You can change any TCP or UDP port session. You can do it in the different ways:
Default application session customization:
Your own application for specific TCP/UDP port:
Cheers
05-25-2016 06:27 AM
Hi Hi,
You can change any TCP or UDP port session. You can do it in the different ways:
Default application session customization:
Your own application for specific TCP/UDP port:
Cheers
05-27-2016 06:15 AM
Exactly what I was looking for, thank you! 🙂
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
