physical m500s to VM panOS

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

physical m500s to VM panOS

L0 Member

I'm wanting to migration from physical m500s to VM panOS.

Are we able to connect a physical to VM and have HA be sync'd?

Otherwise would the recommendation be to setup new VMs has with ha, have the the FWs re-point to the new VM panorama's for management

2 accepted solutions

Accepted Solutions

Community Team Member

Hi @suvigeorge ,

 

Both the firewalls in an HA pair must be of the same hardware model or virtual machine model. Check out techdocs for migrating from a M-series appliance to Panorama VM

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

View solution in original post

Cyber Elite
Cyber Elite

@suvigeorge,

Just wanted to verify that you're on the right track with deploying the VM replacements. You would want to get them configured and export the existing configuration for Panorama and load it into the new VMs, obviously making device specific modifications since you'll be running them side-by-side. 

Once the configuration is migrated (the serial numbers will come as part of the configuration) you simply point the firewalls to the new Panorama instead of the old. 

View solution in original post

3 REPLIES 3

Community Team Member

Hi @suvigeorge ,

 

Both the firewalls in an HA pair must be of the same hardware model or virtual machine model. Check out techdocs for migrating from a M-series appliance to Panorama VM

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Cyber Elite
Cyber Elite

@suvigeorge,

Just wanted to verify that you're on the right track with deploying the VM replacements. You would want to get them configured and export the existing configuration for Panorama and load it into the new VMs, obviously making device specific modifications since you'll be running them side-by-side. 

Once the configuration is migrated (the serial numbers will come as part of the configuration) you simply point the firewalls to the new Panorama instead of the old. 

L0 Member

Thank you all for your help on this

  • 2 accepted solutions
  • 1091 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!