Policy Commit Failed

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Policy Commit Failed

L0 Member

I am trying to push a template stack to FW, the same one is pushed to a lot other FWs but here i get this error 

 

. In virtual-router vr1, OSPFv2 is not supported on unnumbered interface ethernet1/1 in area 0.0.0.0.
. In virtual-router vr1, OSPFv2 is not supported on unnumbered interface ethernet1/2 in area 0.0.0.0.

2 REPLIES 2

Community Team Member

Hi @Jagdev_Dhaliwal ,

 

I'm guessing the device doesn't have any configuration on it's eth1/1 and eth1/2 interfaces.  

Try pushing the eth configuration first so that the interfaces are numbered and after that push the OSPF configuration.

 

Cheers,

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

L0 Member

Thanks for the response Kiwi,

In temperate it call the Eth variables however I have already  added the IP address to template for the interfaces but still no luck 

 

Thanks

JD

 

  • 3256 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!