Prevented third-party VPN

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Prevented third-party VPN

L1 Bithead

Hi

 

As you write in https://www.paloaltonetworks.com/documentation/71/pan-os/pan-os-release-notes/pan-os-7-1-2-addressed... for blocking third-party software, I still can't fix up this bug. I downgrade my FW as you told ( from 7.1.2 to 7.0.1) then upgrade again to 7.1.2, but I still  can't connect with Androti VPN or. Cisco VPN Client to may FW. Global protect works fine.

What shell I do ?

 

Best Regard

Peter  

1 accepted solution

Accepted Solutions

Community Team Member

Hi Peter,

 

Depending if you upgraded directly to PAN-OS 7.1.2 or first to 7.1.x and then to 7.1.2 you might not have fixed the issue.  It looks like the fix won't work if you upgrade to 7.1.2 from the same base version.

 

That specific issue you refer to was related to the fact that the OS did not accept os = any (lower case)... the workaround using the command I showed you earlier must be typed with "Any" (capital A) in order to work-around the issue.

 

 

You can also check in cli configure mode :

 

# show global-protect global-protect-gateway <gateway> client-auth auth-any

auth-any {

  os Any;    (working)      >>>> as opposed to os any;   (not working)

 

If it is capitalized and still not working then you might be facing a different issue and you might want to look further for details (ikemgr.log ?).

 

Cheers !

-Kim.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

View solution in original post

4 REPLIES 4

Community Team Member

Hi Peter,

 

Have you tried the following solution/workaround :

 

PAN-OS-7-1-1-gt-GP-Xauth-does-not-work-Solution

 

I hope it works for you.

Kim.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Yes I did it, but don't works for me.

Any others idea?

Community Team Member

Hi Peter,

 

Depending if you upgraded directly to PAN-OS 7.1.2 or first to 7.1.x and then to 7.1.2 you might not have fixed the issue.  It looks like the fix won't work if you upgrade to 7.1.2 from the same base version.

 

That specific issue you refer to was related to the fact that the OS did not accept os = any (lower case)... the workaround using the command I showed you earlier must be typed with "Any" (capital A) in order to work-around the issue.

 

 

You can also check in cli configure mode :

 

# show global-protect global-protect-gateway <gateway> client-auth auth-any

auth-any {

  os Any;    (working)      >>>> as opposed to os any;   (not working)

 

If it is capitalized and still not working then you might be facing a different issue and you might want to look further for details (ikemgr.log ?).

 

Cheers !

-Kim.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Hi KIm

 

Than you wery much. This was a perfect hint. Yes it's works. 

I hade writen:

auth-any {

  os Any;  

 

but it did't works as you now. But I rewrite it again, commit  a new/same setting and ''voila'' magic works.

 

Thank you very much for help.

 

Best regards 

Peter

Slovenia

  • 1 accepted solution
  • 3022 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!