12-11-2017 06:08 AM
Is there any way to pull a configuration or upload a change to Panorama or a firewall using snmpget? I know you can do something like this with routers and switches but didn't know if you could do it with Palo Alto firewalls.
Thank you
12-11-2017 06:22 AM
Palo Alto Networks' SNMP implementation is read-only, so you can only use it to monitor the firewall/Panorama. If you need to change a configuration, use the API.
12-11-2017 06:22 AM
Palo Alto Networks' SNMP implementation is read-only, so you can only use it to monitor the firewall/Panorama. If you need to change a configuration, use the API.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
