Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Pulling and Changing Configurations through SNMP

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Pulling and Changing Configurations through SNMP

L0 Member

Is there any way to pull a configuration or upload a change to Panorama or a firewall using snmpget?  I know you can do something like this with routers and switches but didn't know if you could do it with Palo Alto firewalls.

 

Thank you

1 accepted solution

Accepted Solutions

L7 Applicator

https://www.paloaltonetworks.com/documentation/80/pan-os/pan-os/monitoring/snmp-monitoring-and-traps...

 

Palo Alto Networks' SNMP implementation is read-only, so you can only use it to monitor the firewall/Panorama.  If you need to change a configuration, use the API.  

View solution in original post

1 REPLY 1

L7 Applicator

https://www.paloaltonetworks.com/documentation/80/pan-os/pan-os/monitoring/snmp-monitoring-and-traps...

 

Palo Alto Networks' SNMP implementation is read-only, so you can only use it to monitor the firewall/Panorama.  If you need to change a configuration, use the API.  

  • 1 accepted solution
  • 3586 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!