Qos profile max bandwidth setting does not match qos interface statistics.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Qos profile max bandwidth setting does not match qos interface statistics.

L2 Linker

Hello Everyone,

 

I have a question about qos and wana to confirm.

 

I creat a qos profile and set maximum bandwidth 0.2 Mbps, after then apply it to network Interface that I want to qos.

 

However, after finishing submit commit, I click the statistics of this interface, I see the class 2 “Maximum Egress(Mbps)” shown 0.78.

 

I also do the same setting on panos 9.1 and panos 10.0, and with same results. but on panos 8.1, I see the class 2 “Maximum Egress(Mbps)” shown 0.2.

 

I am not sure if it is a bug or unknown issue?   Anyone have the same experience with me?  

 

Joy Liu

3 REPLIES 3

L2 Linker

update the screen shot of my lab fw.

PANOS 9.1

QoS Profile setting panos 9.1.pngQoS Interface statistics panos 9.1.png

 

PANOS 10.0

 

QoS Profile setting panos 10.0.pngQoS Interface statistics panos 10.0.png

 

PANOS 8.1

QoS Profile setting panos 8.1.pngQoS Interface statistics panos 8.1.png

Hello @JoyLiu0331 

PA uses wred for QoS limitation. If you have only low number of sessions within that class, the limit is less accurate. My experience with 9.1 and low number of sessions (typically only one) is that the threashold is never reached.

Hi JoergSchuetter,

 

Thanks for the feedbacks.

In my lab, we use layer 3 mode for qos testing.

I generate many sessions for qos testing, but can not be 

Hi JoergSchuetter,

 

Thanks for the feedbacks.

In my lab, we use layer 3 mode for qos testing.

I generate many sessions for qos testing, but the result always does not accurately reflect.

 

Regards,

Joy Liu

 

 

Regards,

Joy Liu

 

  • 2730 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!