Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
08-18-2020 10:00 AM
trying to use monitor (query traffic log) by way of drop-down arrow on a dynamic address group, it gives error saying '<group name> doesn't exist or doesn't contain any member'. However, activating the monitor from a policy rule name which uses the dynamic groups works fine... help? fw on 8.1.13, pan on 9.0.9
08-19-2020 08:03 AM
there are members in that group
When monitoring a policy rule that uses this group, it works fine. Monitoring the group directly though, results in the above error at the top
09-23-2020 05:03 AM
Hi
it is not supported with dynamic
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CmrSCAS
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
